Features:
The correct way to adjust the BOV is through the internal spring only.
The kit includes light, medium and heavy springs.
All you have to do is replace your main charging tube with a new silicon unit, plug in the new boost/vacuum nipple, and connect your blow off valve.
The kit installs your new valve behind the drivers compartment access panel for easy access behind you.
The purpose of the BOV is not only to sound cool, but also to release the pressure that builds up on the charging side of the system.
With nowhere to go, the pressure can cause turbulence in the impeller, slowing down the turbine’s spool and leading to premature wear.
By installing the blow off valve, you can improve the pressurization response, extend the service life of the turbine, and of course, hear the cool whirl!
The kit is designed to connect to the compressor side of the turbocharger and the plastic inflatable tube of the intercooler.
This black silicone tube allows you to install our drain valve directly onto it. Its fluid design helps eliminate any turbulence.
For vacuum, we include a 2-piece billet port with an O-ring machined manifold that enters the X3
manifold and allows access to an ideal location for reference booster pressure gauge or relief valve.
If you want to properly reference the manifold boost/vacuum pressure, you need to go behind the throttle blades.
Fortunately, the CanAm left a good position to connect the channel and plumb to the plastic intake manifold after the throttle body and before the cylinder head.
Fortunately, there is a plug that can be easily removed, and the port is well installedand tight in its place.
Specification:
100% brand new with high quality
Type: Blow Off Valve Kit
Fitment:
For 2017-2019 Can-Am Maverick X3 4×4 Turbo DPS
For 2017-2019 Can-Am Maverick X3 Max R 4×4 XDS Turbo DPS
For 2018 2019 Can-Am Maverick X3 4×4 XMR Turbo DPS
For 2018 2019 Can-Am Maverick X3 4×4 XRC Turbo DPS
For 2017-2019 Can-Am Maverick X3 Max R 4×4 XRS Turbo DPS
For 2018 Can-Am Maverick X3 900 HO 4×4 DPS
Package Including:
1 * Blow Off Valve Kit (As pictures show)
Category
- Home
- Fit 2017-2019 UTV BOV XRS XRC XMR XDS R Maverick Turbo Blow Off Valve Kit
Product categories
- ATV Accessories (6267)
- ATV Air&Oil Filters (650)
- ATV Axles (2469)
- ATV Ball Joint (388)
- ATV Battery Chargers (103)
- ATV Bearings (938)
- ATV Body (20)
- ATV Brakes (2357)
- ATV Bushings (945)
- ATV Cable (718)
- ATV Carburetor (1090)
- ATV Cargo Bag/Luggage (177)
- ATV Chain (186)
- ATV Clutch Accessories (112)
- ATV Covers (1340)
- ATV Drive Belt (475)
- ATV Drive Clutch (1362)
- ATV Engine (66)
- ATV Exhaust (512)
- ATV Fan (177)
- ATV Fender (228)
- ATV Foot Controls (77)
- ATV Fuel Pump (156)
- ATV Fuel Tanks (51)
- ATV Gasket (1219)
- ATV Gear Box or Reverse Gear (258)
- ATV Graphics and Decals (4)
- ATV Handlebars (516)
- ATV Ignition Coil (1110)
- ATV Lighting (1080)
- ATV Mirrors (498)
- ATV Rectifier/Regulator (77)
- ATV Seat belt (44)
- ATV Seats & Covers (163)
- ATV Solenoid (524)
- ATV Sparkplug (23)
- ATV Sprocket (381)
- ATV Starter (534)
- ATV Steering Wheel (26)
- ATV Suspension (1917)
- ATV Switch (1181)
- ATV Tach/Hour Meter (45)
- ATV Throttle Control (38)
- ATV Tools (1348)
- ATV Wheels and Tires and Rim (1239)
- ATV Winches & Mounts (1334)
- ATV Windshields (112)
- ATV Wiring Harness (55)
- Customized parts (1)
Product tags
axle
bearing
bolt
bracket
brake
brake cable
brake disc
brake disk
bushing
bushing block
carburetor
car lamp
car light
centrifugal clutch
clutch
clutch cable
clutch parts
disc-brake
disc brakes
disk brake
exhaust valve
front fork
gasket
holder
ignition coil
ignition spark booster
intake and exhaust valve
jump-spark coil
Lamps
lift kit
Lights
liner bushing
lining
Lowering Kit
shaft
shock absorber
sleeve bushing
spark coil
sparking coil
switch
throttle cable
tire
tool
tyre
washer
Fit 2017-2019 UTV BOV XRS XRC XMR XDS R Maverick Turbo Blow Off Valve Kit
Spread the love
Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on whatsapp
Share on telegram
Share on tumblr