RUN HOUR METER—- Keep an accurate record of engine used for total(TOT) and partial hours(JOB),with ability to program a previous time (INT) for new meter replaced;Do regular maintenance task to determine the time of due(SVC);TOT & JOB hours read up to 999,999 hours;SVC timer range:OFF/5-2000 hours .
REV METER GAUGE—-t enable to check and adjust the idle revolution by various of engine firing patterns; Alert channel for revolution exceed reminder;Display the highest RPM hit since the engine started; RPM measurement range: 0-25000RPM,Alert range: 100-25000RPM,Selectable refresh rate??0.5/1s.
2 BACKLIGHT DISPLAY—- Bright white backlight will help to use it at night or dim place, you can set the backlight mode by always-on, OFF and automatical mode(OFF default, button to wake up) as request;Red backlight will help to remind the engine RPM exceed and maintenance service time arrival.
MULTIPLE INSTALLTION—- You can mount it by screw-on,stick-on or snap-in (Panel cut-out size:2.08×1.57 inches) at any proper position,well-compeleted accessories will keep it fit for different using requirement; One wire hook-up design for engine signal detection with wire shorten or extend( wire length:appox.68.8 inches).
OTHERS—- Built in replaceable battery CR2032 with insulation sheet to keep the capacity in good condition during transport;Favorable water and shock resistence by PC display window and back compartment with O ring sealing; Reliable technical support and after-sales service(2 years).
Backlight Tach Hour Meter, Engine running hours tracking, Maintenance Reminder,RPM MAX RPM record, Alert RPM channel, LCD shutdown, Data retained,Battery replaceable,Waterproof Design.
Product Features:
Hours
Accumulate engine TOT when it shutdown, Range 999,999 hours with 1 min/0.1/1 h accuracy.
It restart from 0 when value exceed 999,999 hours.
Count-down tracking for maintenance time, display the arrival status by red backlight and flashed SVC icon.
Maintenance time range: OFF/5-2000.
TOT initial hours can be programmed for replace an old hour meter.
Record the times per engine working period.
RPM
Record real-time RPM value when engine is on, measurement range 0-25000RPM with 10 RPM resolution.
RPM refresh rate can be set as 0.5S or 1S to keep the RPM value update.
Maximum RPM value record and recall.
Programmable RPM alert to remind the revolution speed exceed by red backlight display and flashed warning icon.
The engine firing patterns to be chosen for RPM accuracy adjustment,suitable for gas engine 2 stroke up to 6 cylinders, 4 stroke up to 16 cylinders.
Specification
24 Hours clock time display.
Internal replaceable CR2032 battery , Data retained after battery change.
LCD window size:approx.1.65??0.49 inches
Product size:approx.3.15×1.56×0.79 inches
Wire length:68.8inch
Accessories: cut-out sticker,3M velcro tape, cable tie,screws,screw nuts,washer, screwdriver,CR2032 Battery, user manual.
Waterproof rate: IP65.