ATV Drive Clutch

??FITMENT??Verify fitment by checking that your Vehicle bolt pattern, hub, and stud thread size before ordering. Only Fits for Vehicle with 4/110 Bolt Pattern, a center bore not larger than 74mm, and M10x1.25 wheel studs.
??BENEFITS??Increase tire clearance, Give your vehicle a more aggressive appearance, could installation a wider, larger, or high traction tires. Bring a better driving experience.
??FEATURES??The ATV Spacers are CNC machined from 6061-T6 aluminum billet and pre-installed with 12.9 grade bolts, Stronger and lighter. Anodized surface has additional corrosion resistance.Not easy to rust and fade.
??SPECIFICATIONS??Bolt Pattern: 4??110mm to 4??110mm/4×4.3″ to 4??4.3″; Hub Bore: 74mm /2.9″; Thickness: 50mm/2 inch; Thread Pitch: 10×1.25mm ; Quantity: 4pcs 4 lug wheel spacer adapters.
??Service??If you are not sure whether the 2 inch wheel spacers. match your vehicle or have any other problems, please contact us and we will give you a solution. We offer a lifetime guarantee and a full refund ,Please confirm compatibility with your vehicle before purchasing. Only for vehicles with 4??110 Bolt Pattern, Hub Bore 74mm with 10??1.25 Studs
Bolt Pattern: 4??110 to 4??110Hub Bore: 2.9 inch (74mm)Thickness: 2 inch (50mm)Thread Pitch: M10x1.25Quantity: 4pcs wheel spacer
Compatible with
Honda
1997-2009 Recon 250
1988-2000 FourTrax 300
2000-2009 Rancher 350
2004-2009 Rancher 400 4WD
1996-2006 Foreman 400 4WD
2004-2016 Rancher 420 4WD
1998-2004 Foreman 450 4WD
2005-2016 Foreman 500 4WD
2001-2016 Foreman Rubicon 500 4WD
Honda
2003-2007 Rincon 650
2006-2016 Rincon 680
Yamaha
1999-2005 Bear Tracker 250
2006-2009 Big Bear 250
1996-2005 Big Bear 350 2WD
1987-2008 Big Bear 350 4WD
1987-2013 Big Bear 400 4WD
2004-2006 Bruin 250 & 350
Yamaha
2007-2013 Grizzly 350 4WD
2007-2013 Grizzly 450 4WD
2009-2012 Grizzly 550 4WD
2007-2016 Grizzly 700 4WD
1993-2004 Kodiak 400 & Kodiak 450
2005-2006 Kodiak 400 & 450 4WD
2004-2014 Rhino 450 & 660 & 700
1995-2010 Wolverine 350 & Wolverine 450
Suzuki
2002-2007 Eiger 400
2002-2009 Ozark 250
2008-2016 King Quad 400
2001-2010 King Quad 450
2011-2016 King Quad 500
2005-2007 King Quad 700
2009-2016 King Quad 750
2003-2007 Vinson 500
Features
The 1 inch wheel spacers are CNC machined from 6061-T6 Aluminum Billet, stronger and lighter, and the mechanical properties are much higher than other products in the market.The pre-installed 12.9-Grade bolts with high toughness and strength, provide a more robust and reliable experience, and are not easy to rust and discolor.The anodized surface provides additional resistance to corrosion. Color is long-lasting and not easy to fade.
Benefits
Widen your vehicle wheel base.Allows installation of wider wheels & tires.Increases stability and resistance to side roll-over.Improve the appearance of the vehicle, make it look more aggressive.
WARNING: PLEASE READ BEFORE BUYING / INSTALLING
Although the installation is simple, professional installation is still recommended.Screw the lug nut onto the bolt, paying attention to the angle of the nutWhen installing the 4/110 spacer with M10x1.25 lug nuts, use a manual wrench for installation, not an torque wrench.Fender Clearance: Please check the clearance of the fender. For vehicles without lift kit, the thickness of the 2″ atv wheel spacers 4??110 should be less than the fender clearance.Wheel Stud Length: If the wheel bolt exceeds the surface of the . You can grind the nut short or replace it with a shorter nut.Ensure that your wheel studs and/or lug nuts does not make contact with the back of your wheel.Check and re-tighten all nuts within 25-50 miles after installation.Improper installation, incompatibilities, or failure to tighten the hardware can result in the loss of the wheel and result in a serious accident, injury or death.
GAsupply 4×110 ATV Wheel Spacers
GAsupply 4×110 ATV Wheel Spacers
GAsupply 4×110 ATV Wheel Spacers
GAsupply 4×110 ATV Wheel Spacers
Thickness
1 inch (25mm)
1.25 inch (32mm)
1.5 inch (38mm)
2 inch (50mm)
Bolt Pattern
4??110 to 4??110
4??110 to 4??110
4??110 to 4??110
4??110 to 4??110
Center Bore
74mm
74mm
74mm
74mm
Thread Pitch
M10x1.25
M10x1.25
M10x1.25
M10x1.25
Color
Black
Silver
Black
Silver
Quantity
2PCS
2PCS
2PCS
2PCS